Difference between revisions of "Application Note: Nemeus Multicast Overview"

From nemeuswiki
Jump to: navigation, search
(Created page with "Category:MM002 Category:Modules Category:Gateways Category:Application Notes Purpose of this Application Note is to help engineer to integrate Nemeus Multicas...")
(No difference)

Revision as of 12:36, 22 October 2018


Purpose of this Application Note is to help engineer to integrate Nemeus Multicast Mechanism. This Application Note is valid for all MM002-xx-EU Modules and MG003 Gateways from 18W41.


1 LoRaWan Multicast

When a device network contain devices that should get same information from server it could be useful to perform multicast, that is sending same payload to several devices in one shot. Of course, all device should listen, so multicast should be done whit class C devices.

2 Nemeus Implementation

Nemeus Multicast adress can be defined with following formalism: 0xFFFFFFFFxxxxxxxx

For the device configuration only the 4 LSB are used

The five less significant bits could be used to manage up to 32 groups and should be set/unset as follow:

  • 1 1111 : 1 group available
  • 1 1110 : 2 groups available
  • 1 1100 : 4 groups available
  • 1 1000 : 8 groups available
  • 1 0000 : 16 groups available
  • 0 0000 : 32 groups available


3 Example with two devices with multicast on 4 groups

Multicast Adress : FFFFFFFF789ABCDA (4 groups) nwk_skey : 0102030405060708090A0B0C0D0E0FCA apps_key : 0102030405060708090A0B0C0D0E0F00 Device 1 in group 1 Device 2 in group 2


3.1 Devices configuration

Device #1
AT+MAC=SMC,789ABCDA,FFFFFFFC,00000001,0,0102030405060708090A0B0C0D0E0FCA,0102030405060708090A0B0C0D0E0F00
Device #2
AT+MAC=SMC,789ABCDA,FFFFFFFC,00000002,0,0102030405060708090A0B0C0D0E0FCA,0102030405060708090A0B0C0D0E0F00

3.2 Gateway configuration

Diapo1


Diapo2


Diapo3


...