IO Digital Sensor

1 General information

1.1 Overview

LoRa™ WAN 1.0.2 EU Class A & C: Activation by Personalization (ABP); Over-The-Air Activation (OTAA)
SIGFOX™ ready
Fully certified on major LoraWan & Sigfox networks
Easy to use and deploy
3.6V / 2200mAh Primary battery Li-SOCl2 embedded
Magnetic switch and LED to ease the installation
RoHS conform / Pre-Certified ETSI EN 300-220 / RED compliance under certification

1.1.1 RF Performance

TX Power 14 dBm (25 mW)
RX Sensitivity -137 dBm
Approx. 10 km range
Integrated PCB antenna

1.1.2 Environment

Operating temperature -40°C to +85°C
Storage temperature 30°C recommended (to limit battery self-discharge)
Rel. humidity 0% to 95% (not condensing)

1.1.3 Options

External antenna
SDK for your SW development purposes
10-30V external power supply
Compatible with the NEMEUS PicoGateway for private networks

1.2 Installation

By using the internal antenna, the position of the sensor is critical.

Install your product as high as possible, and prefer unobstructed area (concrete and metal are the worst materials).

If you cannot fulfill these conditions, it is still possible to use an optional external antenna.

2 Mechanics

Dimensions 60 x 95 x 85mm (109mm including fixing brackets)
96mm spacing between brackets
IP 65
Solid ABS & PC material

3 Accelerometer sensor properties

This sensor has full scales of ±2g/±4g/±8g/±16g and is capable of measuring accelerations with output data rates from 1 Hz to 5.3 kHz.

It can be used as vibration monitoring system. This sensor can check the vibrational footprint and thus the health status of your machine several times a day and provide data to the server. This system makes it possible to carry out maintenance based on reliability by anticipating problems. This system also allows daily measurements to be made on machines in dangerous, remote and inaccessible locations. It can detect whether the machine is running or not.